Food Processing
You run production. We run the energy operations at every plant.
Compressors, blast chillers, CIP, compressed air, cold rooms. The same lines draw the same way at every plant you run, so the same recoverable cost sits in each of them. You don't have an electrical team and you shouldn't need one. We find the pattern at one plant and run the fix across the rest.
Ask Wattif about your operationSeven specialists. Everything between the meter and the margin.
You pay one fee. Each specialist runs autonomously, learns your operation, and never takes a day off. Contracts, equipment, waste, compliance, demand, planning, reporting. You focus on production.
The Operator
Watches every shift
Knows your production schedule, CIP timing, and shift patterns. Catches compressed air running on weekends with no production. Flags CIP during peak tariff. Quantifies every waste in dollars per occurrence.
The Engineer
Monitors equipment health
Reads compressor power signatures, blast chiller recovery curves, defrost cycle profiles. Catches condenser fouling, refrigerant loss, and bearing wear before failure. Dispatches work orders with full diagnosis.
The Dispatcher
Prevents the demand spike
Staggers batch starts around continuous peaks. Sequences morning startup so one 15-minute overlap doesn't set the monthly demand charge. Coordinates fixes without disrupting production.
The Broker
Manages your supply contract
Tariff reviews before renewal. Market comparison against your actual load profile. Contract deadline tracking 90 days out. You never overpay because you forgot to renegotiate.
The Consultant
Models your investments
Solar feasibility against your actual consumption. Battery ROI for your demand profile. Equipment upgrade payback. Real numbers updated monthly, not a one-time consultant estimate.
The Accountant
Traces every dollar
A monthly P&L that traces every dollar of the electricity spend. Cost per unit of output. Your finance team gets the same clarity on energy they have on raw materials.
The Analyst
Handles compliance
NABERS, ISO 50001, HACCP temperature evidence, sustainability reporting. Tracked continuously. Submission packages prepared. Deadlines surfaced months ahead. Always audit-ready.
What it looks like in practice.
These are real findings from food processing facilities. None of them were visible before continuous intelligence.
Blast chiller took 108 minutes to reach 5C. Food safety requires 90.
Condenser fouling reduced cooling capacity by 18%. Work order dispatched. The slow chill is the symptom and the fouled condenser is the cause.
CIP runs at 2PM during peak tariff. Moving to 10PM saves $400/mo.
The clean has to happen, but the timing is flexible. Running CIP at 10PM produces an identical clean at a lower rate. Compressed air leak rate at 24% adds another $800/mo.
Defrost cycle failing silently. Compressor work up 22%.
Heater activates but doesn't reach setpoint. Ice builds on evaporators. Caught from the post-defrost recovery curve, not the heater relay.
One 15-minute overlap sets the monthly demand charge.
Batch mixer started while continuous ovens were at peak draw and compressed air was serving packaging. Staggering by 20 minutes eliminates it.
Combined impact: $3,810 per month
$45,720 per year. Found in the first two weeks. Every one of these was found, fixed, and verified.
Cold chain protection
Evidence for the auditor, a data trail for the insurer, product that stays safe.
Continuous temperature monitoring at 60-second intervals. Intelligence that distinguishes a door left open from a failing evaporator fan by correlating temperature rise rate with door sensor data and compressor power. One is a training issue. The other is a work order.
60-second temperature polling across every cold room and blast freezer
Door discipline separated from equipment failure automatically
HACCP compliance evidence generated continuously, ready for audit
Insurance-grade data trail for every temperature excursion
Defrost cycle monitoring catches ice buildup before product impact
Cold chain status
Live monitoring across 4 zones
Blast Freezer 1
-22.4 C
Cold Room A
2.1 C
Cold Room B
4.8 C
Dispatch Dock
6.2 C
Last reading 12 seconds ago
What you receive every month.
No dashboards to check. No reports to request. Intelligence delivered to your inbox and WhatsApp. The same reporting your CFO would expect from an internal energy team.
Electrical P&L
Every dollar of the electricity spend traced.
Findings ledger
What was found, what was fixed, what is being watched. Status on every finding.
Equipment health
Compressor efficiency, refrigeration performance, motor health. Trending, not just snapshots.
Contract status
Renewal dates, market alternatives, tariff comparison. No surprises.
How it starts.
No procurement process. No 6-month implementation. One conversation to begin.
Tell us about your operation
Production lines, cold rooms, compressed air, shifts. A conversation, not a form. Takes 10 minutes. You walk away with an Intelligence Report.
We handle the hardware
Our field partners install sensors. CT clamps on distribution boards. Temperature sensors in cold rooms. No disruption to production.
Your energy operation is managed
Baselines built. Equipment catalogued. Contracts reviewed. Findings start arriving. Morning briefings begin. You focus on production.
You run production. We run your energy operations.
One conversation. We will show you what is hiding in your electricity bill and what we can do about it.
Ask Wattif about your operation