How Wattif works
Share a bill. Wattif shows you where every dollar goes and starts managing the problems it finds. Whether you run one location or two hundred.
Where does your electricity money go?
Every bill breaks down into four categories. Some of that money is working for you. Some of it is not. Wattif tells you which is which.
Your base load is $1,800/month. $600 of that runs after everyone leaves. Wattif measures it from your interval data, fixes the schedule, and verifies the saving held.
Without Wattif
HVAC running 4 hours past close. Kitchen exhaust on 24/7. Weekend load identical to weekday.
With Wattif
Schedules aligned to actual hours. After-hours load dropped 62%. Verified over 7 days.
One 15-minute spike on March 3rd set your demand charge for the entire month. Cost: $2,700. It is already on your bill as a line item. Wattif prevents it from happening again.
Without Wattif
Morning startup spike exceeds contracted capacity. Wrong tariff. Expired contract on default rate.
With Wattif
Startup staggered. Tariff switched to match your load shape. Peak held below contracted limits.
Your cold room compressor draws 14% more than its baseline. It has been losing efficiency for 3 months. Nobody noticed because it still works. Wattif catches it before it becomes a $200,000 failure.
Without Wattif
Compressor degrading slowly. Chiller efficiency drifting. Solar underperforming its business case.
With Wattif
Problem flagged early. Contractor dispatched with diagnosis. Warranty claim filed where applicable.
After waste, penalty, and silent are removed, what remains is your actual operating cost. Wattif benchmarks it against similar operations so you know if the number is right.
Without Wattif
HVAC running 14 hours on a 10-hour schedule. No visibility into cost per sqm or per unit of output.
With Wattif
Schedules matched to operations. Cost benchmarked. You know exactly what you should be paying.
Solar savings modelled from your actual consumption and location. Better contract terms modelled from your interval data. Demand response revenue modelled from your load flexibility. These are projections with financial models, not estimates from a brochure.
What Wattif does about it
Each of these runs continuously across your operations. You approve when needed. The only people in the loop are the ones who physically touch equipment.
Finds equipment running when nobody is there. Fixes schedules. Verifies the saving held before reporting it.
Staggers startup to avoid the demand spike. Switches you to the right tariff. Manages EV charging within existing capacity.
Monitors equipment health continuously. Flags degradation early. Dispatches your contractor with a pre-diagnosis so they arrive knowing what to fix.
Tracks every contract expiry date. Models your load against available tariffs. Shapes consumption to qualify for better terms at renewal.
Models solar, battery, and demand response against your actual consumption. Every recommendation backed by a financial model, not a brochure.
Classifies every dollar of your electricity into four categories every month. Gives your finance team numbers they can act on.
Start simple. Precision grows with the relationship.
You do not need sensors, integrations, or a site visit to start. A bill is enough.
From a bill
Four categories. Every dollar classified. Benchmarked against similar operations. You see where the money goes for the first time.
With meter data
Half-hourly consumption. Load profiles. Demand patterns. Anomalies detected automatically. The picture sharpens.
With sensors
Per-circuit visibility. Equipment health monitoring. Real-time demand management. The cost of operations decomposes to individual equipment.
Start with one bill.
No integration. No site visit. No commitment. Share a bill and see where every dollar goes.
Talk to Wattif