Grocery & Food Retail
Same brand. Same equipment.
No idea why energy varies 30%.
Every store runs the same equipment, same hours, same layout. Store 47 costs 30% more than Store 48. Regional doesn't see it, store managers don't own it, and nobody is accountable.
Your store teams already see the problems
Your store staff already notice warm cabinets, equipment left on after close, and lights in empty aisles. A tap on a Sense Tag captures it. Wattif compares it across every store and finds the patterns nobody could see from one location.
Zones
Staff tap to report
Today's reports
Store 12, Freezer Aisle: Cabinet feels warm
Store 12, Loading Dock: Door not sealing
Store 47, Back-of-House: HVAC still running, store closed
Store 48, Chiller Cabinets: Ice buildup on cabinet 3
3 stores running HVAC past close. Store 12's freezer cabinet cycling 40% more than identical unit at Store 48. Store 47 is 31% above network average cost per square metre.
What Wattif sends you
Wattif
online
Cross-site report: 3 stores with after-hours HVAC waste. Store 12 freezer cabinet anomaly. Store 47 highest cost per sqm.
Store 47: HVAC still running. Store closed 48 minutes ago. This is the 4th night this week.
How Wattif understands your operations
Wattif starts with your operations: store hours, equipment, and how your stores run. Then it connects what your teams report to what the data shows across every location.
Your operations
Store operating hours by location
Refrigeration layout and cabinet types
Delivery schedules per store
Seasonal promotions affecting load
Wattif asks: What are your store operating hours by location? What refrigeration layout and cabinet types do you use? What are the delivery schedules per store? Any seasonal promotions affecting load? It needs to understand your operation before diagnosing your energy.
Consumption analysis
Best vs worst store comparison
31% cost variance in identical formats
After-hours waste across stores
3 stores running HVAC past close
Refrigeration load variance
Identical stores, 40% cycling difference
Upload retailer data or connect meters across all stores. Wattif finds: best vs worst store comparison, after-hours waste detection across stores, refrigeration load variance between identical stores.
Sensor kit
Recommended per store: 4 circuits
Main incomer
Total load and demand limit
Refrigeration circuit
Compressor health and cycling
HVAC circuit
After-hours waste detection
Lighting circuit
Empty-aisle and overnight waste
Wattif recommends which circuits to monitor per store based on what it already knows. Main incomer, refrigeration, HVAC, lighting. CT clamps clip on in 15 minutes. Baselines in 7 days.
How Wattif thinks about your stores
Continuous reasoning across every store, every piece of equipment, and every pattern, instead of dashboards and temperature alarms.
How Wattif acts across your stores
Four ways Wattif takes action. Each one logged, verified, and reported on WhatsApp.
At portfolio scale
Every store benchmarked
Wattif compares identical formats, flags the outliers, and takes best practice from your own store network.
After-hours detection across all stores
Three stores were running HVAC past close and nobody knew until the tags went up.
Equipment comparison
Same model, same age, 40% more cycling. Wattif catches the maintenance issue before the failure.
Store-wide scheduling
One conversation updates every store, and each one keeps its own hours.
Same stores. Same equipment.
30% energy variance. Wattif finds why.
Start with one store. In 30 days, Wattif delivers an Intelligence Report comparing it against your best performer with specific actions to close the gap.
Start with one storeFree to start. No commitment until you see the report.